Security: Panic Buttons and Cameras

In the case of emergency press the button 2 times.  This will contact the monitoring company and they will contact us via the tablet on the Admin Lobby Desk, if no answer call the 3 contacts, Holly, Jenn or Katie.  They will call the police unless Katie, Jenn or Holly tell them not to.

Admin passwords and codes are in Dashlane.

We pay Rocky Mountain Installs in January for annual monitoring.

Camera System:

1 NVR: 192.168.100.186
Camera 1: 192.168.11.6 Exterior Patio
Camera 2: 192.168.11.5 Exterior West Main Entrance
Camera 3: 192.168.11.7 Interior Commons East Doors
Camera 4: 192.168.11.8 Interior Commons West Doors
Camera 5: 192.168.11.9 Interior Admin Lobby
Camera 6: 192.168.11.11 Interior Unity Stage
Camera 7: 192.168.11.13 Interior Unity Back
Camera 8: 192.168.11.12 Interior Family Ministry Lounge
Camera 9: 192.168.11.14 Exterior East Walkway and Parking Lot
Camera 10: 192.168.11.16 Interior Sanctuary Back
Camera 11: 192.168.11.15 Interior Sanctuary Side
Camera 12: 192.168.1.82 Interior Basement Drake Doors

Mobile App Connection:

Download and install the Clarevision App.  

To add the NVR to the mobile app:

• Open the ClareVision app on your mobile device.

• Follow the on screen directions to get to the add device option.

• Select "Device is on a remote network".

• Select to either use the UID or the QR code.  

  • 
    
    

  • UID:LX7Y2CE374291UYN111A

  • The password is stored in Dashlane

  • Device Name: Clare

• Click Next once it says the device has been successfully added.

• All the cameras will display live views on the next screen.  You must select all the cameras to have a view of them.

• Click done. You will then be able to scroll though all the cameras and select the one you want to focus on. 

To look at a historical view of a camera:

• Open the ClareVision app on your mobile device.

• Scroll until you find the camera you want to view.

• Select Event History and then the filter button (looks like a funnel) to enter the date you want to look into:

  • 
    
    

• Click Apply. 

• A view of the camera and a list of Motion Detected Times will appear.  Just scroll through them until you find the time you want to see.

• There is a lot of data so have patience.